BZYX-3 hydraulic drilling rig
Drilling depth:600m
Drill diameter:300mm
Easy operation&transport
ISO9001 Certificate
BZYX-3 hydraulic drilling rig, super power, can drill depth up to 600m
1. Equipped with wheel undercarrigae device and hydraulic suppeot cylinder, it's very convenient for transport and adjusting the drilling rig level
2. Hydraulic oil pressure feed device, improves drilling efficiency
3. Equipped with normally closed hydraulic chuck, operation is flexible and reliable
4.Pressure gauge display the condition of the bottom of the drill hole
5. Drill mast controlled by hydraulic cyliner, improve the efficiency
6. Diesel engine adopt the electric starter, to reduce the labor itensity
Applications of BZYX-3 trailer mounted water drilling rig
BZYX-3 trailer mounted water drilling rig is mainly used for geological exploration, hydropower project, road and railway construction, buliding project and big diameter water well project
Product parameters:
Drilling depth |
m |
100 |
250 |
300 |
600 |
Drilling DI |
mm |
300 |
200 |
150 |
75 |
Open hole DI |
mm |
300 |
|||
End hole DI |
mm |
75 |
|||
Drilling rod |
mm |
Φ60 |
|||
Drilling angle |
90°-65° |
||||
Rotary Spindle |
|||||
Spindle forward speed |
r/min |
30-1050 |
|||
Spindle reverse speed |
r/min |
29-137 |
|||
Spindle stroke |
mm |
560 |
|||
Spindle inner diameter |
mm |
96 |
|||
Spindle lifting capacity |
KN |
60 |
|||
Main Winch ( drive hydraulic system) |
|||||
Single line lifting speed |
m/min |
0-45 |
|||
Hug floodgate belt width |
mm |
90 |
|||
Tightrope diameter |
mm |
14 |
|||
Hoist single line lifting capacity |
KN |
40 |
|||
Roller diameter |
mm |
200 |
|||
Roller cubic measure |
m |
30 |
|||
Minor Winch( drive hydraulic system) |
|||||
Roller diameter |
mm |
140 |
|||
Wire rope diameter |
mm |
6 |
|||
Capacity roller |
m |
450 |
|||
Mud pump |
|||||
Horizontal Triplex BW-250 mud pump |
|||||
Displacement |
L/min |
250 |
|||
Work pressure |
Mpa |
7 |
|||
Water inlet caliber |
mm |
75 |
|||
Water to exit caliber |
mm |
50 |
|||
Gear Oil pump |
|||||
Duplex gear oil pump CBF-F63/25 |
|||||
Front displacement、pressure |
63mL/r 20Mpa |
||||
Behind displacement、pressure |
25mL/r 20Mpa |
||||
Drilling rig Power |
|||||
Diesel engine |
Hp |
R4105ZD 76HP |
|||
Electric motor |
KW |
Y180L-4 22KW |
|||
Crawler chassis |
|||||
moving speed |
2Km/H |
||||
motor work pressure |
20Mpa |
||||
Displacement |
1634ml/rev |
||||
chassis loading |
3T |
||||
crawler chassis length |
2.6m |
||||
motor oil displacement |
50L/min |
||||
crawler chassis width |
0.35m |
||||
Max high crawler |
0.508m |
||||
Drilling system
1. Power system, equipment that provides energy for a complete set of rigs;
2. Working system, equipment that works according to the requirements of the process;
3. Transmission system, equipment for transmitting, conveying and distributing energy to the working unit;
4.有限公司ntrol system, control each system and equipment, coordinate and accurately work according to the requirements of the process;
5. Auxiliary system, equipment that assists the main system to work