The sand discharge rubber pipes are used with Dredgers for sand conveyance. Installed in between of the steel pipes, and to make the pipelines more flexible. Thickness of the pipe wall is from 15mm to 80mm. The suitable working temperature is from -30°Cto 50°C. It is convenient to install, flexible to use, safe, abrasion-resistant and bending-resistant.
Advantage:
1.Professional manufacturing factory.
2.Good quality servicecontrol system, produced by skilled workers.
3.Over 20 years experience of manufacturing marine land steel pipe fittings.
4.Near Qingdao and Shanghai port, convenient and low cost for transport
5.Flexible payment method.
6.Timely and effective delivery
Items |
Index |
Items |
Index |
Items |
Index |
Notice |
Working Pressure MPa |
≥0.8 |
Tensile Strength MPa |
≥11.8 |
Aging Resistance |
70ºCx72h |
The parameters follow HG—T2185—91 criterion |
Test Pressure MPa |
≥1.2 |
Elongation(%) |
≥400 |
Chance Rate of Strength (%) |
+25%-- -25% |
|
Burst Pressure MPa |
≥2.4 |
Ozone Proof |
No Cracking in 48 hours exposing in Ozone |
Adhesion Strength Between Each Layer KN/m |
≥1.0 |
|
Conveying Medium |
Muddy, water |
Abrasion |
≤9.875px³ |
Strength Layer |
4 layers of cord fabric |