product manual

Process flow:

1.Basic refurbishment:

After confirming that the large surface of the foundation meets the paving standard,repair the part of the foundation:fill the voids of the cement concrete foundation with PU slurry;repair the asphalt concrete foundation and the small area ofthe cement concrete foundation(generally no more than 1M2).

2.Paving the base layer:

This process is one of the two most important processes for water-permeable plastic track.Generally there are two types of manual paving and mechanical paving.Our company uses all mechanical paving,so only the mechanical paving process is introduced here.

3.Spray surface layer:

This process is the most important one in the water-permeable runway process.It is constructed in two times,that is,it must be cross-sprayed twice.As for the direction of the first and second passes,there are no specific requirements,but it must be cross-vertical spraying,and after spraying No obvious joints:

4.Scribe:

The surveying and mapping institute or the owner and professionals will conduct的再保险test and /confirm/iation.After the retest is correct,use a professional marking machine to mark and draw lines to ensure consistent line width and uniform color.

Scope of application:

Schools at all levels,stadiums,track and field tracks,semicircular areas,and auxiliary areas.

National fitness path.

Indoor gymnasium training track.

Pave the playground road.

It can be used all-weather,good elasticity,good impact absorption,strong wear resistance,good weather resistance,strong compression resistance,strong nail resistance,good impact resistance,flatness,good adhesion,strong and durable.

Maintenance:

1.Breathable plastic track,suitable for ordinary sports shoes,training shoes,rubber canvas shoes or soft rubber shoes.

2.All vehicles are forbidden on the air-permeable plastic track,and severe mechanical impact and friction should be avoided on the plastic track.

3.The edge of the air-permeable plastic track should be protected and not stripped at will.If damage is found,it should be repaired in time.

4.Air-permeable plastic track avoid contact with organic solvents and chemicals.

5.Keep it clean,you can rinse it with water,and use 10%ammonia or detergent to wipe off oily dirt.

6.It is forbidden to smoke and throw cigarette butts,chewing gum or sugary drinks.