The gas produced by burning fuel (oil or gas) through the burner directly dries the product. The burner is set to automatic control, which can directly control the temperature of the gas produced. Generally speaking, the process of using direct-fired hot air furnace drying, the temperature required should not be too low (generally higher than 11. degrees Celsius).

If the fuel is coal or other combustible waste, the gas temperature needs to be controlled by controlling the fuel addition speed and the blower.

4.5 million kcal direct-fired hot blast stove

Direct-fired hot blast stoves can be divided into gas-fired direct-fired hot blast stoves (ZRQ series), oil-fired direct-fired hot blast stoves (ZRY series) and coal-fired direct-fired hot blast stoves (JRF series) according to different fuels.

Since the direct-fired hot blast stove has no heat exchange, its thermal efficiency is particularly high. The special design of our company is simple in operation, reasonable in structure, low in running cost and long in service life.

Our company provides direct-fired hot blast stoves with specifications ranging from 30,000 kcal/hour to 10 million kcal/hour. Gas-fired direct-fired hot blast stoves (ZRQ series).

5 million kcal direct-fired hot blast stove

The gas-fired direct-fired hot blast stove is the most widely used. In general, if the fuel is natural gas with a relatively low sulfur content, a direct-fired hot blast stove can meet the requirements of food processing. If the fuel is other gas, such as LPG, check the cleanliness of the gas source to see if it can meet the needs of food processing. If applied to chemical industry or building materials, gas stoves can generally be used.

Fuel-fired direct-fired hot blast stove (ZRY series)

Oil-fired direct-fired hot blast stoves are generally only used in chemical or construction materials, etc., and do not require a high drying temperature for the product.

Coal-fired direct-fired hot blast stove (JRF series)

Due to the large amount of gas impurities produced, the practical application of coal-fired direct-fired hot blast stoves is relatively small, and it is only used in some processes that do not require color and impurities. If the fuel is coal, but other combustible wastes, special design is needed according to the characteristics of the fuel.