Flower basket screws, also known as turnbuckles, rigging, and tightening buckles, are used to bind and fasten steel wire ropes.
The flower basket screw is used to tighten the wire rope and adjust the tightness. Among them, the OO type is used for occasions that are not frequently disassembled, the CC type is used for frequent disassembly occasions, and the CO type is used for occasions where one end is often disassembled and the other end is not frequently disassembled.
Turnbuckle screws are mainly divided into cast malleable steel, ordinary carbon steel, and forging according to the different process and forming methods. The current market is mainly ordinary carbon steel and forging. The ordinary carbon steel turnbuckle screws are mainly used for static binding and stability in unimportant situations. Scenes, such as windbreak in gardens, agricultural greenhouses, etc. Forged turnbuckle screws are used for lifting, lashing and reinforcement of freight. Such as cargo bundling, sling connection, steel structure cable and rod connector, etc. in logistics.
Surface treatment: generally there are two types of electroplating and hot plating, which mainly play a role in preventing corrosion.
Specification information:
The flower basket bolts are expanded and contracted by the lead screw to adjust the tightness of the wire rope. The components can be bundled during component transportation and loosened during installation and correction.
It is composed of an adjusting rod with left and right-hand threads, a nut and a pull rod. The adjusting rod is also fixed with a cover plate, a fixing plate, and a guide plate with an anti-theft and anti-loosening device connected by anti-theft and anti-loosening bolts. It is necessary to use a special matching sleeve to unscrew the anti-theft and anti-loosening bolt, which has good anti-theft effect, safety and reliability. After the anti-theft and anti-loosening device is disassembled, it does not need to be taken off. The ring guide plate on it is used to slide along the pull rod, and it can be adjusted and operated after a distance of movement, so it is convenient to use. Its structure is simple, easy to process, low cost and strong in practicability. It is especially suitable for power lines, especially as a positioning device for high-voltage iron tower pull rods.
The flower basket bolt is a steel casting. When designing and calculating, only the correspo扩散连接拉杆可以计算,但需要的tions of the flower basket should be one level higher than the tie rod. The following are the commonly used tie rods and the corresponding flower basket specifications in the steel structure design:
Trolley flower basket
Φ20 M22
Φ24 M27
Φ28 M30
Φ30 M32
If other specifications are used, the flower basket can be customized.
Various specifications of ordinary or high-strength turnbuckle bolts, turnbuckle bolts, open body turnbuckle, open body turnbuckle, materials are: Q235B, 45# steel, 40Cr, 35CrMoA, Q345D turnbuckle bolt, turnbuckle bolt, open body turnbuckle, Open body flower baskets, etc. What is the flower basket bolt specification table? The flower basket bolt is mainly used to adjust the tightness of the wire rope. It is widely used, so the flower basket bolt specification table is naturally more commonly used data.
套筒螺母螺栓一般分为the first tie rod, turnbuckle bolt components, second tie rods, and positioning parts. The turnbuckle bolt components include a first guide plate, a second guide plate, a first connecting piece and a second connecting piece.
The flower basket is a steel casting. When designing and calculating, only the corresponding tie rods can be calculated, but the specifications of the flower basket should be one level higher than the tie rods.