Instructions:
1.According to the sampling needs, select the matching sampling swab and sampling tube.
2. Place the sampling swab after collecting the sample into the virus sampling tube.
3. Break the swab at the easy break point of the sampling swab rod, discard the tail, and cover the sampling tube
4. Mark the information on the label of the return bag as required.
5.Specimens should be sent to the corresponding hospital, laboratory or third-party testing center within 2 working days, and the storage temperature is 2-8 ℃; if they cannot be sent to the laboratory within 48h, they should be placed at -80 ℃ Or save below, and ensure that the collected samples are sent to the corresponding laboratory within 1 week. The sample should avoid repeated freezing and thawing.
Swab sampling method:
1.Nasal swab: gently insert the swab head into the nasal cavity for sampling, use another swab to collect another nasal sample in the same way, invade the swab head into the cell preservation solution, and discard the tail
2. Pharyngeal swab: collect the throat sample with a swab, invade the swab head into the cell preservation solution, and discard the tail.
Notes on slack:
1.禁止直接有限公司ntact the sampler with the sampling liquid.
2. It is forbidden to flood the swab with the sampling liquid before sampling.
3. This product is a one-time product and cannot be used repeatedly.
4. The product can only be used within the validity period, and expired products cannot be used.
5.当collecting virus specimens, professionals should strictly follow the sampling procedures.