1. Each tether of the safety net should be tied to the f拉梅,周围的四条绳索(边缘)close to the bracket, and the tie should meet the requirements of easy knotting, strong connection and easy to untie. in principle. Reinforced rope safety nets should also be connected to the bracket during installation.
2. The flat mesh screen should not be stretched too tightly. The minimum distance between the flat mesh and the surface of the object below should not be less than 3m. The distance between the two layers of flat mesh must not exceed 10m.
3. The vertical mesh surface should be perpendicular to the horizontal plane, and the maximum gap between the edge of the operation and the operation should not exceed 10cm.
4. The safety net after installation should be inspected by a special person before use.
5. The safety net in use should be inspected regularly or irregularly, and the falling objects on the net should be cleaned up in time. It should be replaced in time after receiving a large impact.
The above information on how to choose a safety net for the construction site is shared here. It is recommended that everyone be careful when choosing a safety net. It is important to choose a good quality manufacturer!