There is a big difference in the operation of liquid filling machines and general equipment, so today the manufacturer will talk about this topic with you.
Liquid filling machine
1.自动灌装机前转过身on, check the disinfection liquid level; whether the power supply and air pressure are normal; manually check whether the solenoid valves and cylinders are good; whether the actions are normal; whether the water pumps are turned correctly; whether the air is exhausted . If abnormal conditions are found, the fault can be eliminated before production.
2. Fully automatic filling machine is automatically flushed, disinfected, filled, capped and capped during production without human intervention, but the operator should closely observe the status of each part, find problems, and automatically turn to the manual in time to prevent An accident happened. When the position of the chain is not correct, push the spindle manually, and then push the chain to the normal position. The disinfectant should be replenished in time to prevent the pump from idling under dry conditions and burning out the seal.
3. After the production of the automatic filling machine is finished, the residual liquid in the pipeline should be drained, the gas path and water source should be cut off, and the power supply should be turned off.